Overview Of Australian Standard For Waterproofing Membranes

The slip resistance test classification is determined by the mean angle of inclination achieved and a correction factor Independent Testing Australia based on the angle of inclination of the 3 calibration panels. These calibration boards are then used to provide a correction factor to standardise the walkers. The angle that the limit of safe walking is obtained is known as the mean angle of inclination.
Stay Ahead of Safety Standar


Timely routine inspections on membranes helps to ensure the best out of the membrane system in place. Regular inspections of waterproofing installations are essential to mitigate defects. This is an essential tool in WISE Corporate Australia for identifying variances in temperature. Knowing the moisture levels in a concrete slab To ensure long-term success of all coverings The initial fees that are paid will then be deducted from the cost of the report if we are engaged to proceed. Our bespoke reports are carried out by a DB-U Registered Builder and tailored to your specific need

We have worked with a wide range of builders, architects and developers to ensure appropriate design considerations have been made for internal wet areas, external balconies, rooftops and podiums and basement structure

Research has indicated that TRL rubber may provide a better indication of barefoot slip resistance due to the softer yielding nature of the material, being more comparable to human skin than Four S rubbe

Implementing Proper Falls and Drainage in External Waterproofing Systems
A well-designed gradient ensures that water is efficiently directed towards drainage points, minimising the risk of pooling and ingress. It encompasses various aspects of installation, from substrate preparation and membrane application to ensuring proper water drainage and membrane termination. The Projex Mission is to source and supply technically excellent products to meet the needs of owners, designers, Independent Testing Australia insurers and operators of buildings and structures for specialist protection against water, industrial liquids, impact and corrosion risk

The wet barefoot inclining ramp slip test provides the A, B & C slip ratings that are commonly used to specify the slip resistance of floor surfaces around swimming pools, communal changes rooms and the lik

Protect Against Insurance Claims & NCC Compliance Failures
The displacement volume test method is a useful test alongside a ramp test where the surface is severely profiled or structured and designed to provide drainage or entrapment of contaminants. While the measurement of slip resistance using wet methods is achieved with Appendices A, C and D, the inherent slip resistance value (uncontaminated surface) is achieved with the dry test (Appendix B) and is the only method suitable for testing under dry conditions. These four slip resistance test options provide an assessment of the contribution of a pedestrian Independent Testing Australia surface to the risk of slipping to assist in the specification of a surface material for most pedestrian applications. This test is more suited to profiled or textured surfaces and may provide a classification of either R9, R10, R11, R12 or R1


Frequently, a cycle of alternating UV radiation and condensation (with water spray) is employed to mimic outdoor exposure. Smithers will only retain your personal information for as long as necessary to fulfil the purposes for which we collected it and in accordance with the time periods found in our Data Retention Policy. To prevent unauthorised access or disclosure of your information, we have put in place stringent security and best practice processes to ensure your information is protected online. Smithers follow strict procedures to ensure your personal and financial information remain secure. By providing your personal information e.g. name, postal/email address, telephone number enables Smithers to provide you with tailored information on our services. We don't just provide data; we deliver actionable insights that empower you to make informed decisions about your polymer material


To simulate outdoor weathering, an accelerated weathering tester exposes materials to alternating cycles of UV light and moisture at controlled, elevated Independent Testing Australia temperatures. They help manufacturers project how long material may last when exposed to outdoor conditions within a fraction of that time. As a weather testing equipment pioneer, a consistent experience in product durability testing is ensured for either a seasoned manufacturer or a new one by Presto Enviro, backed by decades of trust and innovation. This method can measure a product’s ability to resist deterioration of mechanical, electrical, and optical characteristics when exposed to light and heat. This method enables a rapid evaluation of a material’s durability and resistance to degradation, providing valuable insights into its long-term performance.
What is a UV Weathering Test Chamber
Our labs are equipped with cutting-edge technology to produce repeatable, reliable data under tightly controlled variables, ensuring the most accurate assessment of your product's performance under specific environmental conditions. This ensures that automotive components remain reliable and visually appealing over time. These tests provide valuable insights that help manufacturers improve product formulas, materials, or production methods, making products stronger and Independent Testing Australia long-lastin